LGP DIY House edition

[Juice]

you've already got lock washers, i don't think you need the stainless nylon lock nut, just go with http://www.lowes.com/pd_40958-37672-492 ... facetInfo=

stainless and galvanizing don't jive

[meow]

And you're at the wrong store. Home Depot or die

[Juice]

lolteamorange, you guys are so cute

[canaan]

I'll let me fellow LGP DIYers decide my weekend work plans. You have to options, choose wisely.
1.) New closet doors in guest room
2.) Redo master bath closet

bathroom closet, dude/ who cares about the guest room? you'll see the closet every time you're taking a ponikarovsky.

[eddysnake]

Looks good to me, but buying hardware online gives me the willies.

my buddy works there so he'll get it all together for me. good system.

[eddysnake]

you've already got lock washers, i don't think you need the stainless nylon lock nut, just go with http://www.lowes.com/pd_40958-37672-492 ... facetInfo=

stainless and galvanizing don't jive

thanks!

[meow]

I'll let me fellow LGP DIYers decide my weekend work plans. You have to options, choose wisely.
1.) New closet doors in guest room
2.) Redo master bath closet

bathroom closet, dude/ who cares about the guest room? you'll see the closet every time you're taking a ponikarovsky.

Well, the guest room will be a nursery in about 5 months. So technically, nursery closet doors or master bath closet?

[cheesesteakwithegg]

I'll let me fellow LGP DIYers decide my weekend work plans. You have to options, choose wisely.
1.) New closet doors in guest room
2.) Redo master bath closet

bathroom closet, dude/ who cares about the guest room? you'll see the closet every time you're taking a ponikarovsky.

Well, the guest room will be a nursery in about 5 months. So technically, nursery closet doors or master bath closet?

You got some time on the nursery, so Id probably go with the master bath, though it may make your wife happy to make some progress on the nursery

[Juice]

technically, team blue guys would do both

[mac5155]

Not sure what good a split lock washer is going to do on wood. wouldnt it over time just split into the wood? I'd just go with standard washers. even a nylon insert lock nut is overkill i think.

[Juice]

crap good point, if you want to lock it you need a regular washer under the split washer

[mac5155]

Light coat of anti-seize on the bolt if you're gonna be tightening it up each year wont hurt

[eddysnake]

Not sure what good a split lock washer is going to do on wood. wouldnt it over time just split into the wood? I'd just go with standard washers. even a nylon insert lock nut is overkill i think.

so just

5/16-in x 3/4-in Galvanized/Un-Coated Standard (SAE) Flat Washer
http://www.lowes.com/pd_41574-37672-492024_0__?productId=3033292&Ntt=5%2F16+washer&pl=1&currentURL=%3FNtt%3D5%252F16%2Bwasher&facetInfo=

and

5/16-in-18 Hot-Dipped Galvanized Standard (SAE) Hex Nuts
http://www.lowes.com/ProductDisplay?partNumber=40958-37672-492019&langId=-1&storeId=10151&productId=3033190&catalogId=10051&cmRelshp=rel&rel=nofollow&cId=PDIO1

should be fine?

[Juice]

i would get all hot dipped galvanized stuff... i also thought of something else eddy, i know the plans for that other one show 5/16" hardware, but because yours is so much bigger, i might be inclined to go with 3/8" or even better, 1/2" at least for the main lower supports. if this thing is going to be getting used heavily, i wouldn't want to stand or have my kids on a raised 8x8 deck if the hardware was kind of wimpy.

[eddysnake]

i would get all hot dipped galvanized stuff... i also thought of something else eddy, i know the plans for that other one show 5/16" hardware, but because yours is so much bigger, i might be inclined to go with 3/8" or even better, 1/2" at least for the main lower supports. if this thing is going to be getting used heavily, i wouldn't want to stand or have my kids on a raised 8x8 deck if the hardware was kind of wimpy.

too late, already purchased. I'll double them up on the 2x6s

and for 50 of the 3/8, it's $200

[Juice]

i was thinking more of just the 16 you will need for the 4 corners of the base

[eddysnake]

i was thinking more of just the 16 you will need for the 4 corners of the base

good thinking, I'll grab some

[tjand72]

Words of wisdom if you're redoing a kitchen - buy the tallest faucet you can. If you think that it's tall enough at
the store, it's not.

[joopen]

Words of wisdom if you're redoing a kitchen - buy the tallest faucet you can. If you think that it's tall enough at
the store, it's not.

Plus always do an undermount sink

[Juice]

no updates eddy? do i have to have canaan come out there and liveblog this event or what?

[canaan]

... I'm getting in the car now

[eddysnake]

10 hours in, homestretch. Making a run to get more screws and beer, chalkboard going up soon. Roof will be another day

[eddysnake]

Little tease

[canaan]

I see you've fortified the base for the cannon installation. Smart.

[eddysnake]

8ft chalkboard wall is in